Injector and Glow Plug Tool
EN0361
Glow Plug Remover Kit
Specifications
Diesel Engine requires GLOW PLUG for combustion process iv engine cylinder.
The heating element in glow plug heat up and drive the cylinders gradually.
The heating element in glow plug heat up and drive the cylinders gradually.
Contents:
1PC hex 12mm spindle, hex 30mm nut , cone center tool.
1PC drill installer.
2PC bolt, 8mm hex, 1/4"-28 UNF.
2PC pilot pin 6mm diameter x 3.5 x 40mm(L).
1PC alley key.
1PC 9.7mm square socket.
1PC 5.5mm to 7mm drill.
1PC 5.5mm to 9mm drill.
1PC T-handle.
2PC diameter 3.5mm drill.
1PC tap M8 x P1.0mm.
1PC tap M10 x P1.0mm.
1PC tap 1/4"(6.3mm) x 28 UNF.
1PC hex 12mm spindle, hex 30mm nut , cone center tool.
1PC drill installer.
2PC bolt, 8mm hex, 1/4"-28 UNF.
2PC pilot pin 6mm diameter x 3.5 x 40mm(L).
1PC alley key.
1PC 9.7mm square socket.
1PC 5.5mm to 7mm drill.
1PC 5.5mm to 9mm drill.
1PC T-handle.
2PC diameter 3.5mm drill.
1PC tap M8 x P1.0mm.
1PC tap M10 x P1.0mm.
1PC tap 1/4"(6.3mm) x 28 UNF.
Packaging: Blow case
10/SETS/CTN/19.6/20.6/KGS/1.5'
10/SETS/CTN/19.6/20.6/KGS/1.5'