Hose Clamp and Disconnect Tool
CS0179
Hose Removal Plier
Specifications
Special pyramid-shaped tooth design efficiently grips hose clamps without slipping.
This special shape also enhances the strength in gripping,
helping remove melted rubber hoses near the engine.
Large jaws are designed to be in round form.
The jaws are designed to be slightly tapered when closed.
This special design can guarantee the jaws are on straight lines when opened at the width (about 20 mm) that is suitable to work on most hose clamps.
This special shape also enhances the strength in gripping,
helping remove melted rubber hoses near the engine.
Large jaws are designed to be in round form.
The jaws are designed to be slightly tapered when closed.
This special design can guarantee the jaws are on straight lines when opened at the width (about 20 mm) that is suitable to work on most hose clamps.
Length: 300 mm (11.8”)
Width: 56.5 mm (2.2”)
Height: 32mm (1.25”)
30-degree offset
Material: Cr-Mo
Finish: Phosphate manganese
Width: 56.5 mm (2.2”)
Height: 32mm (1.25”)
30-degree offset
Material: Cr-Mo
Finish: Phosphate manganese
Packing: Sliding Card